Phantom Blade Zero PC Specs, File Size and Preload Guide

Phantom Blade Zero lands on October 29, 2026 for PS5 and PC, and the day-one install is one of the largest of the generation. Backend data pulled from the PlayStation Network by the @PlaystationSize account on October 16 confirms a 134.857 GB download size on PS5 at the $59.99 Standard price, with preload opening October 27 at 3 AM CET / 2 AM GMT, exactly 48 hours before launch. PC players get the same install via Steam, and S-Game has confirmed the game is digital-only at launch, so there’s no disc version to fall back on.

Quick answer

• File size: 134.857 GB on PS5. The PC install will be in the same neighborhood; S-Game hasn’t published a separate number for Steam.
• Preload opens: October 27, 2026 at 3 AM CET / 2 AM GMT. That’s 48 hours before launch.
• Unlock time: October 29, 2026 at 2 AM GMT, per the PlayStation Game Size backend listing. Steam serves a region-based unlock that lands earlier for US buyers (see the breakdown below).
• Minimum PC: Windows 10/11 64-bit, Intel Core i7-8700K or AMD Ryzen 5 3600, 16 GB RAM, NVIDIA GeForce GTX 1660 6GB or AMD Radeon RX 5500 XT 8GB, DirectX 12, and an SSD. That tier targets 1080p / 30 FPS with upscaling.
• Recommended PC: Intel Core i5-10600K or AMD Ryzen 5 5600X, 16 GB RAM, NVIDIA GeForce RTX 3060 Ti 8GB or AMD Radeon RX 6700 XT 12GB. That tier targets 1440p / 60 FPS with upscaling.
• No Steam Deck rating from Valve yet. Phantom Blade Zero is launching as a PlayStation 5 and PC title. It’s a single-player UE5 action RPG with full controller support, but Valve has not published an official Deck Verified, Playable, or Unsupported category for appid 4115450 as of October 17.

The file size: 134.857 GB and what it means

The October 16 PSN backend listing is the first hard number for Phantom Blade Zero’s install size. TheGamer and PLAY3.DE both reported the same 134.857 GB figure on October 16 and 17. The size puts it in the same generation as Final Fantasy VII Rebirth (the PS5 version is roughly 148 GB), Call of Duty: Modern Warfare 4, and Gran Turismo 7 on PS5, all UE5 or near-UE5 games with high-resolution textures, dense cinematics, and 4K-targeted assets.

For comparison:

S-Game hasn’t published a separate PC install number. UE5 PC ports typically land within a few GB of the PS5 version, sometimes slightly larger when high-resolution texture packs are installed. Plan for 130-140 GB on the PC side, and assume any day-one patch (S-Game hasn’t confirmed one yet) will push that further. The PC specs page on Steam does not list a separate storage requirement, but the SSD is required for both Minimum and Recommended tiers, so a spinning hard drive is not an option.

For a 1 TB PS5, that’s roughly 13% of the drive gone in one install. For a base PS5 with multiple current titles already installed, you’ll want to clear space before the preload opens. For the 2 TB PS5 Pro, the same install is closer to 6-7%, manageable but not nothing.

Preload timing

The PSN backend listing sets the preload start at 3 AM CET on October 27, 2026, per PLAY3.DE’s October 16 read. That is 2 AM GMT, 5 PM PT on October 26, and 8 PM ET on October 26. Pre-orders on PlayStation get the early download window automatically; non-pre-orders will not see the preload option in their library. Steam preloads typically open 24-48 hours before launch as well; S-Game hasn’t confirmed a Steam-specific preload hour yet, but the storefront usually mirrors the console window.

The full game unlocks October 29, 2026 at 2 AM GMT per the PlayStation Game Size listing. That puts the global unlock at:

• 2 AM GMT on October 29 (London, Lisbon)
• 3 AM CET on October 29 (Berlin, Paris)
• 11 AM JST on October 29 (Tokyo)
• 1 PM AEDT on October 29 (Sydney, which is on daylight saving in late October)
• 7 PM PT on October 28 (Los Angeles, a day early)
• 10 PM ET on October 28 (New York, a day early)

Steam tends to unlock its games based on regional time zones for PC, so US buyers may get the game at midnight local time on October 28 rather than waiting for the 2 AM GMT global moment. The Steam release date is officially October 28, 2026 in the US storefront; the PlayStation release date is October 29 worldwide. We will update this guide when S-Game confirms the PC unlock hour.

PC system requirements

Both Minimum and Recommended tiers target Windows 10 or 11 64-bit. There is no Mac or Linux build. The full official spec list from the Phantom Blade Zero Steam page is below.

A few practical reads from the tier list:

• 8th-gen Intel / first-gen AMD Ryzen is the floor. That’s a 2017-era CPU on the Intel side and 2019 on the AMD side. S-Game is leaning on modern API features and shader compilation more than raw core count.
• 16 GB RAM is the minimum, not the recommended. Most UE5 PC ports in 2026 list 32 GB as the recommended tier; sticking to 16 GB here suggests S-Game has tuned for a tighter memory footprint, but plan on closing background apps before you launch.
• GTX 1660 / RX 5500 XT is roughly a 2019 mid-range card. It will run the game at 1080p with upscaling (likely FSR or DLSS) to hit 30 FPS. Don’t expect 60 FPS without a more modern GPU.
• RTX 3060 Ti / RX 6700 XT is a 2020-2021 mid-range card. That’s the sweet spot for 1440p / 60 FPS with upscaling. Higher-tier RTX 4070 / RX 7800 XT or above should push the game to 4K / 60 with upscaling on Recommended or higher settings.
• No native Mac or Linux version. ProtonDB has no reports yet (the ProtonDB page returns no JavaScript-disabled data as of October 17), so Linux players will be running it through Proton and may need to wait for community testing. There is no Steam Deck Verified rating from Valve.

Storage and SSD: why it matters here

UE5 games stress the storage subsystem in ways older engines don’t. Shader pre-compilation, virtual texturing, and Nanite geometry streaming all require sustained read bandwidth. The Steam page makes SSD mandatory at both Minimum and Recommended tiers. A 5400 RPM laptop hard drive will technically launch the game, but load times will be brutal and streaming hitches will break the action combat flow.

If you’re building or upgrading for this game on PC, plan for at least 150 GB of free SSD space to handle the installation plus the day-one patch S-Game is likely to ship. On PS5, the same 150 GB budget applies. The PS5 SSD slot accepts standard NVMe drives; the PS5 Pro’s SSD slot is the same hardware and accepts the same drives.

What Phantom Blade Zero is

S-Game’s official Steam listing describes the game as a kungfupunk action RPG built in Unreal Engine 5. The 60+ hour main story follows Soul, an elite assassin framed for his master’s murder and given 66 days to live with a tainted heart. There are more than 30 primary weapons and 20-plus Phantom Edges (secondary weapons), and S-Game has said there are more than 50 bosses (our earlier coverage). For a deeper look at the game’s structure and combat, see the Phantom Blade Zero game page and our Editions Compared guide.

FAQ

How big is Phantom Blade Zero on PC?

S-Game has not published a separate PC install number. The PS5 version is 134.857 GB per the October 16 PSN backend listing. Most UE5 PC ports land within 5 GB of the PS5 installation, so plan for roughly 130-140 GB on PC plus any day-one patch. The Steam page lists SSD as required for both Minimum and Recommended tiers.

When does the Phantom Blade Zero preload start?

PSN preloads open at 3 AM CET / 2 AM GMT on October 27, 2026, per the PlayStation Game Size backend listing. That’s 5 PM PT on October 26 for US pre-order buyers. Steam preloads typically open 24-48 hours before launch; S-Game has not confirmed a Steam-specific preload hour.

What time does Phantom Blade Zero unlock on October 29?

The PSN listing shows 2 AM GMT on October 29, 2026. For US buyers that lands at 7 PM PT on October 28 and 10 PM ET on October 28, the day before the listed release date. Steam typically unlocks by region at midnight local time, so US PC players should expect October 28 in the evening rather than the morning of October 29.

Can my PC run Phantom Blade Zero?

If your rig has an Intel Core i7-8700K or AMD Ryzen 5 3600, 16 GB RAM, an NVIDIA GTX 1660 or AMD RX 5500 XT, and an SSD, you meet the Minimum tier for 1080p / 30 FPS with upscaling. The Recommended tier for 1440p / 60 FPS with upscaling needs an Intel i5-10600K or AMD Ryzen 5 5600X with an RTX 3060 Ti or RX 6700 XT. Both tiers require a 64-bit installation of Windows 10 or 11.

Is Phantom Blade Zero coming to Steam Deck?

Valve has not published an official Steam Deck Verified, Playable, or Unsupported category for Phantom Blade Zero as of October 17. The game is built for PS5 and PC with full controller support and is a single-player action RPG, so a Playable rating is plausible after launch, but ProtonDB has no community reports yet either. We will update this guide once Valve or the community weighs in.

Is there a physical disc version of Phantom Blade Zero?

No. S-Game confirmed to retailer PlayAsia that Phantom Blade Zero is launching as digital-only, and PlayAsia retracted the physical SKU it had previously listed. There is no Collector’s Edition or boxed version at launch. A disc release at a later date hasn’t been ruled out, but S-Game has not committed to one.

Can I pre-order Phantom Blade Zero?

Yes. The Standard ($59.99) and Digital Deluxe ($69.99) editions are available on the PlayStation Store and Steam. Pre-ordering either edition unlocks the Treasure Basin accessory and the Legacy outfit early, and both are also obtainable through in-game progression. The Digital Deluxe adds two exclusive outfits for Soul, the digital artbook, and the soundtrack.

We compiled the official PC specs from the Phantom Blade Zero Steam listing, the 134.857 GB install figure from the @PlaystationSize October 16 PSN backend read, and the preload and unlock times from the same listing as reported by TheGamer and PLAY3.DE. S-Game’s UE5 installation lands in the same 130-150 GB range as Final Fantasy VII Rebirth (PS5) and Black Myth: Wukong (PS5). The company has emphasized dense environments and high-fidelity motion capture, both of which inflate texture and animation data. The recommended tier’s 1440p / 60 FPS target suggests S-Game expects most launch players to use upscaling rather than native 4K. There is no Steam Deck rating from Valve yet, and no native Mac or Linux build; Linux players will be running the game through Proton and waiting on community reports. We will update this guide with the official Steam preload hour and ProtonDB early data once they land in the days before launch.

Edited by Kerwin Stewart, Editor-in-Chief · How we report